Acomdata Tango 2.5-Inch USB 2.0 eSATA Portable Enclosure for SATA Hard Drive TNGXXXUSE-RED (Red) Reviews
Acomdata Tango 2.5-Inch USB 2.0 eSATA Portable Enclosure for SATA Hard Drive TNGXXXUSE-RED (Red) Reviews
Other products by Acomdata Ratting 4.5 Out of 5.0 Special Offer Total New 18 Total Use 0
Read More From Here Now
Acomdata TNGXXXUSE-RED Tango Portable 2.5-Inche Enclosure USB 2.0 and eSATA - With Enclosure (Blue)
Technical Details
- Acomdata TNGXXXUSE-RED Tango Portable 2.5" Enclosure USB 2.0 & eSATA - Blue Enclosure- Hard drive enclosure takes a SATA hard disk Hi-speed USB 2.0 and eSATA 48-bit logical block addressing Silent operation Hot Pluggable
- Mac and PC compatible Easy installation and setup
- Three-year limited warranty Free tech support forever Contents of box Acomdata Tango portable drive enclosure USB cable Installation guide
See more technical details
By Leonardo (Alaska)
Works perfectly, but... As for the electronic interface and functioning, this enclosure works perfectly. The finish and quality are also very good. Great price! The problem I faced was that the SATA 2.5" drive from my son's laptop would not fit inside the enclosure! The sides of the hard drive and the retention rails in the enclosure did not line up. Go figure! The new SATA 2.5" drive that I purchased my son as a backup/image drive fit perfectly. I did not know there were external differences in SATA laptop drives big enough to prevent a drive from fitting into an enclosure. Strange, but true. I would still definitely recommend this enclosure. If you have a new drive you want to use it with, there should be no problem.
By Dumbledore (New Jersey, USA)
The install instructions could use some work, but having said that, I really like this product.
Very good looking; the USB connection worked as advertised. I used it to convert my laptop's old hard drive (I upgraded the hard drive)to an archive drive. For $20, I've got a really nice backup system that I can carry around in my pocket.
By A. Jauregui (California)
When I opened the case, I was not careful with removing the screws and accounting for gravity. This resulted in the contents of the enclosure to spill out and drop on the floor. While some claim its fragile and doesn't hold an HDD all that well, it stood up well to the beating I initially gave it and functions perfectly. It has not let me down yet and it does what its supposed to do very well.
By Santu (houston)
The manual instructions are incorrect.
I almost broke the printed circuit board(PCB) when I tried to pull it out from the back.
What you need to do is:
(back= where the two screws are there
front=where the indicator light is there)
1. Remove the two screws from the back and remove the plastic face plate
2. Push the pcb gently from the back or pull it from front. It will come out from the front
3. screw the hard disk to the pcb using supplied four screws
4. slide it into the enclosure from the front and screw the remaining two screws on the back.
It is great looking enclosure. But the two sides are plastic. It would have been nice if they were also aluminum.
By italx03 (Centreville, VA USA)
This case is very well built and easy to use and has served me well so far.
Images Product
Read more Acomdata Tango 2.5-Inch USB 2.0 eSATA Portable Enclosure for SATA Hard Drive TNGXXXUSE-RED (Red)
Post a Comment